Pyro-D-Lite Professional 18 Cue Firing System FCC Certified

Click to enlarge

Professional 18Cue Firing System Brief Introduction

We promised you a pro system for consumer prices and here it is. Our new units now have metal terminal conectors and OverLoad Protection. Thats right OverLoad Protection.

This is the latest model for 2010-2011. The system is contained in a professional waterproof case design and the advanced integrated circuit enhances performance and security. Its complete function satisfies more clients with different requests.
Moreover, it has input & output triggers which make it compatible with any advanced Euro or American style firing systems. Its nice-looking and priced to sell.

Click Here To Download Instructions 

OverLoad Protection Video is Below

Function

1. Remote control ignition in single, step, sequential and all mode

2. Wire control ignition (in Sequence Mode)

3. Signal input/output Trigger ignition(in Sequence/All Mode Features

1. Professional Water-proof design

2. High-tech integrated circuit and seismic design

3. Digital LED for time-setting adjustments and assigned executable

program 4. Safety Key to arm firing circuit

5. Intelligent battery protection at low charge and overloading

protections 6. Input& output trigger ignition

7. Rechargeable internal battery with high capacity

8. Auto-testing on power-up

9. Outside flexible and durable antenna

Function of buttons on the remote control

1. 1-18 numerical button control cues respectively. That means when you press anyone, the corresponding cue on the receiver will fire

2. Button CONT executes the sequence mode. Once executed, the cues on the receiver will fire consecutively in order according to the set time.

3. Button STEP executes the manual mode. Every press of this button will fire one cue from 1 to 18 respecively.

4. Button ALL executes the all mode. Pressing this button will fire all 18 cues simultaneously.

5. One safe switch on the side face of the remote control to insure user’s safety. LED Digital Screen(4 lights indication and digital numerical display)

1. ))))) is the transmitter to receiver indicator light. When programmed to the transmitter, pushing any button on the transmitter will light a red LED that indicates the firing system is receiving the signal.

2. P refers to the transmitter signal assigned to the receiver.

3. FIRE refers to the fire mode. Turn the function selection switch to FIRE position,

4. TEST indicate the test mode. Turn the Function Selection Switch to TEST position,the blue test light on and there will be no display on the screen.

“ADD” “ PROGRAM” “_” “_”“OR/DELETE” ADD sets the address of receiver from A01 to A16. This setting is only needs to be used if you are using the special sequential programming mode.

PROGRAM: Press this key until the P light goes out, about 10 seconds, this deletes any previous programmed transmitters assigned to the receiver. After that, turn the function selection switch to middle(OFF) and then turn to FIRE again.

Press PROGRAM, the will P light shine and then press any button on the transmitter you want to assign. You should see the P light blink twice. The receiver now will receive its signal only from this transmitter.

INPUT&OURPUT MODE This mode is used to make a multi-receiver. Use high quality wire to connect the receivers (as many as you want) in series without limits. So it’s perfect for the large pyrotechnic display which requires a level of complexity.

Notice Points: 1. Use high quality electrical wire.

2. ALL mode: Set every receiver to All mode and all receivers will fire at the same time.

3. SEQUENCE Mode: Set arbitrary time(ranging from 0.01s to 9.99s) for every receiver, same or different for different receivers. And every cue will fire in order from receiver to receiver.

4. The source of input signal can be DC 6-30V, from battery or other firing equipment.

Battery Indication

Digital LED indication for state of battery

RED LED shine indicates the charging process.

RED LED flash indicates low power. That means you have to charge the battery.

GREEN LED indicates charge completed.

CH indicate the charge socket with a sealed battery with great capacitance. Charge

the battery when the RED LED flashes. Every charge may need 4-5 hours and it’s advised that someone should be there during charge in case fire.

Outside Antenna 1. It is flexible, so it works well to pick up signals.

2. It has been placed on the outside of the case, so that you can close the lid after the system is armed to protect it from fall out.

3. Water-proof design. High Quality Case High quality case is designed to be water-resistant. Five Modes for Wireless Control:

1. Single Mode: 1-18 numerical button control cues respectively. That means when you press any one, the corresponding cue on the receiver will fire.

2. Sequence Mode: Button CONT executes the sequence mode. Once pressed the cues on the receiver will fire consecutively in order according to the set time.

3. Step Mode: Button STEP executes the manual mode. Every press of this button will fire one cue from 1 to 18.

4. All Mode: Button ALL executes the all mode. Press this button will fire all 18 cues simultaneously. Note_: The above four modes can be work only in 1,2,3 channel.(There is a channel selection switch on the transmitter)